Tekbox TBOH01-SET

DC-LISN set - ideal for EMC compliance tests according to CISPR25

The set is ideal for testing conducted emissions from DC-powered devices, e.g. to protect potential receivers on board vehicles according to CISPR 25.

.

The device under test should be placed on an insulated surface above the reference ground plane. The spectrum analyzer should measure the conducted Störspectrum on both supply lines. The RF output of the unused LISN must be terminated with 50 Ohm.

The exact details of the structure and the limit values for pipeline-bound loads can be found in the CISPR 25 standard or in the relevant standardization works for the respective application.

The set consists of:

• Tekbox TBOH01 / 5 µH DC voltage LISN up to 10 A

• Tekbox NM-BNCM/75/RG58 / Coaxial cable (RG-58), N connector <> BNC connector, 75cm

• Tekbox TBT-BNC/50 Ohm-2W / BNC terminating resistor, 50 Ohm, 2W